®
Professional Disc Jockey Products
VHF High Frequency Wireless Microphone & Receiver Units
Features:
•This product is a professionally designed wireless microphone and receiver system that can be operated in conjunction with DJ, Singer, Karaoke or Public Speaker.
•A quartz crystal oscillator is used for the circuits of this product thus making the frequency stable without shifting and receiving outward interference.
•Models are available for either handheld, headset, or lavaliere microphone options
Equipment options:
Operating Instruction:
1.Remove receiver from packaging.
2.Attach receiver to
3.Extend antennae for reception
4.With the unit off, hook up the power supply to the receiver of this system and plug it into an appropriate outlet.
5.Hook up the microphone cable from the output of the receiver to the microphone input on your mixer or recording device.
6.Turn the switch ON and the power indicating light will come on indicating that power is on.
7.Install the battery(s) in the transmitter. For handheld microphones, turn and open the base section of microphone and load in 9V battery. For the hands free models open the transmitter battery door and install battery(s).
8.For hands free models, plug in microphone into the jack on the top of the transmitter.
9.Turn on the switch of microphone and the indicating light will flash once indicating that the microphone is turned ON. If the battery indication light is on this means the battery needs to be replaced.
10.After microphone is turned on, the signal indicating light of receiver will come on indicating that the signal from the microphone has been received.
11.Rotate the volume knob on the receiver to the desired volume to use the Microphone.
12.Adjust output volume of the hand free transmitter to obtain good sound without distortion.
Please record the serial number of your unit as well as the name of the dealer from whom you purchased the unit. Retain this information with your receipt for your records. Please return the warranty card enclosed to register your microphone with us.
MODEL: WS-
SERIAL NUMBER:
PURCHASED FROM:
DATE OF PURCHASE:
Precautions:
A.Load the battery in accordance with the drawing attached to the battery compartment in the microphone.
B.If the microphone is not in use, please turn off the switch of the microphone and remove the battery. Also turn off the receiver, and unplug it.
C.After the microphone has been used for a period of time, the indicating light at the bottom of the microphone will come on indicating that the battery has been exhausted and change of battery is necessary.
D.For operation, always turn on the power for the receiver first, then turn on the power for the microphone, and then bring up the level on your mixing console. After operation, bring down the level on your mixer then turn off the power for the microphone and turn off the power for the receiver.
E.As this system has been subjected to precision calibration prior to factory delivery, do not open for adjustment, as this will void the warranty. Please return to an authorized Numark repair site for all necessary repairs.
Specifications:
RECEIVERS:
CARRIER FREQUENCY: 170 – 210 MHz VHF BAND
CHANNEL:
QUIETING SENSITIVITY (S/N=30Db, THD=3%) S/N RATIO AT 1mV INPUT: 60 dB
UNBALANCE OUTPUT LEVEL:
BALANCE OUTPUT LEVEL
THD(1KHz, 10KHzDEV, 1Mv): 0.5%
FREQUENCY DRIFT: +/- 50KHz
POWER REQUIREMENT: DC12V/200mA
