NuTone installation instructions Apartment House Communication System, 467 J201, P4 P3

®

INSTALLATION INSTRUCTIONS

READ & SAVE THESE INSTRUCTIONS!

Apartment House Communication System 4

MODEL: 467 POSTAL/MAIN DOOR TIMER MODULE

1.The Model 467 should be installed in the Model 478 Control Unit to provide:

1.1Timed door release and postal lock function in a one-entry system.

1.2Timed door release and postal lock function at the MAIN (No. 1) entry in a two-entry system.

2.On the Model 478 Control Unit, remove the screws holding the chassis to the mounting base and lift chassis with PC board away from the base.

3.With P3 and P4 (two, 3-pin plugs) on the Model 478 PC board inserted into J201 and J202 on the Model 467, gently push the 467 Module until it is seated firmly against the 478 PC board. Make certain that the shaft of the Delay Time Set control is aligned with its access hole.

4.Using the screws removed in step 2 above, reassemble the 478 chassis to its mounting base. Make certain that the PC board grounding lead is secured at the top screw.

®

478

P4

P3

467 J201

INSTALLATION INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS!

Apartment House Communication System 4

MODEL: 467 POSTAL/MAIN DOOR TIMER MODULE

1.The Model 467 should be installed in the Model 478 Control Unit to provide:

1.1Timed door release and postal lock function in a one-entry system.

1.2Timed door release and postal lock function at the MAIN (No. 1) entry in a two-entry system.

2.On the Model 478 Control Unit, remove the screws holding the chassis to the mounting base and lift chassis with PC board away from the base.

3.With P3 and P4 (two, 3-pin plugs) on the Model 478 PC board inserted into J201 and J202 on the Model 467, gently push the 467 Module until it is seated firmly against the 478 PC board. Make certain that the shaft of the Delay Time Set control is aligned with its access hole.

4.Using the screws removed in step 2 above, reassemble the 478 chassis to its mounting base. Make certain that the PC board grounding lead is secured at the top screw.

478

P4

P3

467 J201