Architectural & Engineering Specifications February 2005
DESCRIPTION
LIGHT FIXTURE:
•Corrosion resistant finish
•Satin nickel finish
•Frosted glass shade
•Close mount design
•Uses two 60 Watt maximum, candelabra base bulbs. Bulbs not included.
•Vent openings in fixture base for exhaust fan
•Light fixture assembly is
BLOWER:
•
•Polymeric blower wheel
HOUSING:
•Rugged,
•Sturdy
•Tapered, polymeric duct fitting with
NOTE: For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (Type I.C.) Use supply wiring rated for at least 90° C
SPECIFICATIONS
VOLTS | AMPS | CFM | SONES | DUCT | |||||
|
|
|
|
|
|
|
|
|
|
120 |
| 1.6 | 80 | 2.5 | 4" Round | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Decorative
Light / Fan
MODEL 757SNNT
ARCHITECT'S SPECIFICATION
•Decorative Light/Fan unit shall be NuTone Model 757SNNT.
•Unit shall have galvanized steel housing with dual integral mounting brackets. It shall be ducted to a roof or wall cap.
•Blower assembly shall be removable and have a permanently lubricated motor.
•Light fixture assembly shall be
•Lamps shall be two 60 Watt maximum, candelabra base, incandescent.
•Air delivery to be no less than 80 cfm and sound level no greater than 2.5 sones. Air and sound ratings shall be certified by HVI.
•Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
INSTALLATION
Complete installation instructions are included with each Decorative Light / Fan.
NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227
REFERENCE | QTY. | REMARKS | Project |
Location
Architect
Engineer
Contractor
Submitted by | Date |
50B 99043692A
