NuTone specifications Decorative Light / Fan, MODEL 758NT, Description, Specifications

Models: 758NT

1 1
Download 1 pages 23.03 Kb
Page 1
Image 1
DESCRIPTION

Architectural & Engineering Specifications October 2006

DESCRIPTION

LIGHT FIXTURE:

Corrosion resistant, painted white finish

Frosted glass shade

Close mount design

Decorative Light / Fan

Uses two 60 Watt maximum, candelabra base bulbs. Bulbs not included.

Vent openings in fixture base for exhaust fan

Light fixture assembly is plug-in and removable

BLOWER:

Plug-in permanently lubricated motor

Polymeric blower wheel

HOUSING:

Rugged, 26-gage galvanized steel construction

Sturdy key-holed mounting brackets for quick, accurate installation

Tapered, polymeric duct fitting with built-in backdraft damper for easy, positive duct connection and no metallic clatter

NOTE: For installation in flat ceilings only.

U.L. Listed for use in insulated ceilings (Type I.C.) Use supply wiring rated for at least 90° C

SPECIFICATIONS

VOLTS

AMPS

CFM

SONES

DUCT

 

 

 

 

 

 

 

 

 

 

120

 

2.2

70

3.5

4" Round

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at

0.1in.staticpressure,basedontestsconducted in AMCA’s state-of-the-art test laboratory.

Sones are a measure of humanly-perceived loudness, based on laboratory measurements.

MODEL 758NT

ARCHITECT'S SPECIFICATION

Decorative Light/Fan unit shall be NuTone Model 758.

Unit shall have galvanized steel housing with dual integral mounting brackets. It shall be ducted to a roof or wall cap.

Blower assembly shall be removable and have a permanently lubricated motor.

Light fixture assembly shall be plug-in, removable and include a frosted glass shade and a corrosion-resistant base with painted white finish.

Lamps shall be two 60 Watt maximum, candelabra base, incandescent.

Air delivery to be no less than 70 cfm and sound level no greater than 3.5 sones. Air and sound ratings shall be certified by HVI.

Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)

INSTALLATION

Complete installation instructions are included with each Decorative Light / Fan.

NuTone, Inc., 4820 Red Bank Road, Cincinnati, OH 45227 (1-888-543-8687)

REFERENCE

QTY.

REMARKS

Project

 

 

 

 

Location

 

 

 

 

Architect

 

 

 

 

Engineer

 

 

 

 

Contractor

 

 

 

 

Submitted by

Date

 

 

 

 

 

 

 

 

60K

99043981A

Page 1
Image 1
NuTone specifications Decorative Light / Fan, MODEL 758NT, Description, Specifications, Architects Specification