INSTALLATION INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS!

Gable Fan

MODEL: GF1200N, GF900N

IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

(A)Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

(B)Before servicing or cleaning unit, switch power off at service panel and lock service panel to prevent power from being switched on accidentally.

When the service disconnecting means cannot be locked,

securely fasten a prominent warning device, such as a tag, to the service panel.

CAUTION: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

CAUTION: This unit has an unguarded impeller. Do not use in locations readily accessible to people or animals.

INSTALLATION INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

(A)Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

(B)Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local code authorities.

(C)When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

(D)Ducted fans must always be vented to the outdoors.

(E)NEVER place a switch where it can be reached from a tub or shower enclosure.

•READ INSTRUCTIONS CAREFULLY BEFORE PROCEEDING.

•WARNING: To reduce the risk of fire or shock do not use with solid state speed control.

•This fan is intended for installation behind existing attic louvers.

SPECIFICATIONS: Thermally protected motor operates on 115vAC, 60 cycle. Large 14" fan blade, 15 inch diameter shroud.

ASSEMBLING THE UNIT

Refer to Figure 1.

Using provided hardware attach the mounting brackets to the unit.

MOUNTING THE UNIT

Refer to Figure 2.

•Secure unit to structure inside the attic.

•2" x 4" wall studs may be modified to allow for proper spacing.

•Cover remaining area of louver. (See Figure 3)

Important: For every 300 CFM of fan performance, a minimum of one square foot of inlet space is necessary for proper operation. Air inlet area should be located as far from fan location as possible.

MOUNTING

BRACKETS

FIGURE 1

FIGURE 2

FIGURE 3

MOUNTING THE THERMOSTAT

Refer to Figure 2.

Mount the thermostat to a nearby rafter using screws (not provided) through the mounting tabs.

Page 1 Page 2
Page 1
Image 1
NuTone GF1200N installation instructions Important Safety Instructions, Installation Instructions, Assembling the Unit
Page 1 Page 2

GF1200N, GF900N specifications

The NuTone GF1200N and GF900N are two high-performance ventilation fans that exemplify the brand’s commitment to quality and innovation in home ventilation systems. Designed with both functionality and aesthetics in mind, these models are ideal for maintaining a fresh and comfortable indoor environment.

The NuTone GF1200N features a powerful 120 CFM motor, making it suitable for larger spaces up to 150 square feet. This model is engineered to reduce humidity and eliminate odors, thereby enhancing the overall air quality in your home. The GF1200N is equipped with a sleek design, available in a modern finish that seamlessly integrates with any bathroom décor. It also incorporates a quiet operation feature, keeping noise levels at a minimum, which is particularly important for bathrooms or any place requiring tranquility.

In contrast, the GF900N offers a slightly lower output of 90 CFM, making it ideal for smaller areas or rooms up to 100 square feet. It boasts similar qualities as the GF1200N, including an elegant profile and quiet performance, ensuring it does not disrupt the peace of your living space. Both models feature a durable construction designed to withstand moisture-rich environments, enhancing their longevity and reliability.

The installation process for both the GF1200N and GF900N is straightforward, with easy-to-follow instructions provided. They are compatible with various duct sizes, allowing for flexible installation options based on the requirements of different home layouts. This adaptability makes them a favorite among homeowners and contractors alike.

Moreover, both models incorporate advanced technologies aimed at energy efficiency. They are crafted to consume minimal power while delivering maximum airflow, meeting the demands of modern eco-conscious living. Additionally, the built-in LED lights provided with these units offer excellent illumination without significantly increasing energy bills.

Overall, the NuTone GF1200N and GF900N ventilation fans are remarkable choices for those seeking reliable performance, aesthetic appeal, and energy efficiency in their home ventilation solutions. Their combination of features, reliability, and quiet operation makes them standout options for improving indoor air quality while maintaining style and comfort in your living spaces.
Top Page Image Contents