NuTone NS130SS, NS136WW, NS136BL Page , Non-DuctedInstallation Only, 10Ducted Installation Only

models Ns130Bl • Ns130ss • Ns130WW Ns136Bl • Ns136ss • Ns136WW

recirculation scroll wall

6 Non-Ducted Installation Only:

Remove Recirculation Scroll Wall from inside the hood.

tabs

▼

▼

recirculation

cover

7 Non-Ducted Installation Only:

Depress the Tabs on the Recirculation Cover and push cover out through top of hood to remove it.

recirculation

grille

Page 

thumb	recirculation
screw
	plate
	slots & tabs
	recirculation
	grille

9 Non-Ducted Installation Only:

Remove Recirculation Plate and Thumb Screw from plastic bag. Slide plate down onto Recirculation Grille so that Slots in plate fit into Tabs on grille. Secure plate with thumb screw.

3¼” x 10”	7” OVAL
damper /	duct plate **
duct
connector
	knockout
	openings

10Ducted Installation Only:

Remove vertical or horizontal duct knockout. Attach 3¼” x 10” Damper/Duct Connector (if using 3¼” x 10” duct) or 7” Oval Duct Plate ** (if using 7-inch round duct) over the knockout opening.

**Note that the 7-in. round duct will need to be squeezed into an oval shape to connect to the 7-in. oval duct plate on the hood.

8

Non-Ducted Installation Only:

Remove Recirculation Grille from plastic bag and snap it into the opening in the top of the hood.