MODELS QTRN080L • QTREN080FL • QTRN110L • QTREN110FL

®

Page 4

8. Push grille

against ceiling.

9. Remove light lens.

Carefully insert a small flat-blade screwdriver between grille and lens. Pry lens out.

10. Install light bulbs.

Fluorescent bulb supplied with “FL” models.Purchase an incandescent bulb for “L” models - 100W Max.Purchase a 4Wincandescent night light Fluorescent bulb shown bulb.Insert bulbs into their sockets. Replace lens.

SERVICE PARTS

SERVICE NOTE

To remove BlowerAssembly:

Unplug motor (7).

Remove screw (4) from motor plate (9) flange.

Find the single TAB on the motor plate (located next to the receptacle).

Push up near motor plate tab while pushing out on side of housing. Or insert a straight- blade screwdriver into slot in housing (next to tab) and twist screwdriver.

Key No. Part No.Description
197016466 Housing297016449 Duct Connector-4"398010102 Wiring Plate499170245 Screw, #8-18 X .375 (2 req’d)597016584 Wire Panel/Harness Assembly (QTRN080L/QTRN110L)97016585 Wire Panel/Harness Assembly (QTREN080FL/QTREN110FL)699020284 Blower Wheel799080568 Motor (QTRN080L)99080561 Motor (QTREN080FL)99080569 Motor (QTRN110L)99080563 Motor (QTREN110FL)899100491 Isolator (4 req’d)997016468 Motor Plate1099250959 Washer #8 (4 req’d)1199260558 Nut, Hex Lock #8-32 (4 req’d)*97016621 Blower Assembly (QTRN080L)*97016589 Blower Assembly (QTREN080FL)*97016622 Blower Assembly (QTRN110L)*97016590 Blower Assembly (QTREN110FL)(includes key nos. 6 thru 11)1297016543 Grille Assembly (QTRN080L/QTRN110L)97016547 Grille Assembly (QTREN080FL/QTREN110FL)(includes key nos. 13 & 14)1399140199 Grille Spring (2 req’d)1499111281 Lens1599271311 Bulb, 26W Fluorescent (QTREN080FL/QTREN110FL)1697016618 Ballast Assembly (QTREN080FL/QTREN110FL)1799260488 Nut, Hex #10-24 (2 req’d) (QTREN080FL/QTREN110FL)1899111293 Spacer (2 supplied)
Order service parts by “Part No.” - not by “Key No.”

TAB

99043412B