READ AND SAVE THESE
INSTALLATION INSTRUCTIONS!
Accessory |
|
|
|
Switch | COMMON HOT(Light) | Light) | TO UNIT |
| HOT(Vent) HOT(Night |
| |
|
|
| |
INSTALLATION |
|
|
|
Used with |
|
|
|
Combination. |
|
| LIGHT |
1.Install a
2.Refer to Figure 1. Run power wiring
| from fuse box or circuit breaker and |
|
|
| VENT |
|
|
|
|
| |
| wiring from |
| WHITE | BLACK | NIGHT |
| outlet box. |
| LIGHT | ||
3. | Secure all wires to outlet box with an |
|
| ||
| approved box connector. |
|
|
|
|
4. | Dress all leads, leaving |
|
|
|
|
| approximately 1/2" of bare wire for |
|
|
|
|
| making connections. | TO | 120vAC, 60Hz |
| |
5. | Refer to Figure 1. Make wire | HOUSE POWER | FIGURE 1 | ||
|
|
| |||
| connections. Observe cover plate |
|
|
|
|
|
|
|
|
| |
| markings | ||||
| that the switch and the unit it controls are properly grounded. |
6.Refer to Figure 2. Using two supplied screws, secure switch bracket assembly to outlet box adapter plate.
7.Position wall plate over switch assembly and secure with supplied screws.
TO UNIT |
| USE A |
|
| ADAPTER PLATE TO COVER |
2 GANG |
| DOUBLE GANG BOX. |
BOX | ADAPTER | ADAPTER PLATE NOT |
| SUPPLIED WITH SWITCH. | |
| PLATE | |
|
|
TO 120vAC,
60Hz HOUSE POWER
FIGURE 2
READ AND SAVE THESE
INSTALLATION INSTRUCTIONS!
Accessory |
|
|
|
|
| |
|
| HOT (VENT) HOT (Night Light) |
|
| ||
Switch |
| COMMON HOT (LIGHT) | TO UNIT | |||
|
|
| ||||
|
|
| ||||
INSTALLATION |
|
|
| |||
|
|
|
|
| ||
Used with |
|
|
|
|
| |
Combination. |
|
|
|
| LIGHT | |
1. | Install a |
|
|
|
|
|
2. | Refer to Figure 1. Run power wiring |
|
|
|
| VENT |
| from fuse box or circuit breaker and |
|
|
|
| |
|
|
|
|
|
| |
| wiring from |
| WHITE | BLACK |
| NIGHT |
| outlet box. |
|
| LIGHT | ||
3. | Secure all wires to outlet box with an |
|
|
| ||
| approved box connector. |
|
|
|
|
|
4. | Dress all leads, leaving |
|
|
|
|
|
| approximately 1/2" of bare wire for |
|
|
|
|
|
| making connections. | TO | 120vAC, 60Hz |
| ||
5. | Refer to Figure 1. Make wire | HOUSE POWER | FIGURE 1 | |||
|
|
|
| |||
| connections. Observe cover plate |
|
|
|
|
|
|
|
|
|
|
| |
| markings | |||||
| that the switch and the unit it controls are properly grounded. |
6.Refer to Figure 2. Using two supplied screws, secure switch bracket assembly to outlet box adapter plate.
7.Position wall plate over switch assembly and secure with supplied screws.
TO UNIT |
| USE A |
|
| ADAPTER PLATE TO COVER |
2 GANG |
| DOUBLE GANG BOX. |
BOX | ADAPTER | ADAPTER PLATE NOT |
| SUPPLIED WITH SWITCH. | |
| PLATE | |
|
|
TO 120vAC,
60Hz HOUSE POWER
FIGURE 2