SPRING MOUNTING |
NAIL |
SPRING (SPACE 1⁄2" FROM WOOD) |
(INSTALL SPRING IN CONNECTING |
BAR AS SHOWN BELOW) |
CONNECTING BAR |
SHUTTER FRAME |
FIGURE 6 |
WIRING
•CAUTION: Electrical connections and all wiring should be in accordance with the National Electrical Code and all local codes that may apply.
•WARNING: To avoid possible injury or electrical shock, disconnect power at fuse or circuit breaker box before attempting to wire this fan.
•Incorrect wiring may cause motor failure and possible fire. If necessary, engage the services of a qualified electrician to wire fan.
Connect electrical wiring from wall switch to motor leads
in motor junction box. If two speed switch is not used, make sure red lead of motor (low speed) is capped with a wire nut.
IMPORTANT: Be sure to ground fan by connecting ground wire to ground screw of junction box.
OPERATING FAN
Before turning fan on, open windows and interior doors to insure proper air intake through rooms to be ventilated. If you have a fireplace, be certain the flue damper is closed to prevent chimney dirt and soot from being brought into the house by the fan. Always start fan on high speed and allow louver to open fully before switching to low speed.
FIGURE 7 |
