Nuvo NV-P2100 owner manual Audio Amplifier Back Panel, Unit On

NV-P2100

Audio Amplifier Back Panel

MODEL NV-P2100

HIGH EFFICIENCY 200 WATT

STEREO AMPLIFIER

120V 60HZ 250 WATTS

NuVo Technologies Cincinnati Ohio. USA

AUDIO

L	SENSITIVITY
	OdBV = 1.0RMS
INPUT	LEFT	RIGHT
2	0	0
R
+6	-12 +6	-12

INPUT OUTPUT

CONTROL

POWER	VOLTAGE	UNIT
MODE	TRIGGER	ON
ON/OFF SWITCH	3-30 VOLTS	+12VDC
AUDIO AC/DC	AC OR DC	100mA

SPEAKER

OUTPUT POWER

8 OHM: 70W X 2

4 OHM: 100W X 2

USE ONLY WITH 250V FUSE

1 2 3 4 5 6 7 8 9

1.Audio Source Inputs: The P2100 will accept any line level stereo audio signal. This can be from the preamp lineout of a multi-source, multi-zone whole-house system such as the NuVo Essentia system, or the audio output of any non-amplified source, such as an AM/FM tuner, CD player, or a Satellite receiver.

2.Audio Input 2:This is an alternate audio input for a stereo 1/8" mini plug.

3.Audio Source Outputs: These stereo outputs allow the incoming audio source to be daisy chained to another amplifier.

4.Sensitivity Gain Control: Left and right channel sensitivity trim pots allow the incoming signal to be increased or decreased to maximize the potential output of the audio source.

5.POWER MODE:This switch dictates how the amplifier responds to external triggers. The 2100 has 3 trigger methods; an incoming audio signal, an external voltage input, or the power button on the front of the amplifier.

6.Voltage Trigger: This input trigger allows the P2100 to power up whenever a voltage of 3-30 volts AC or DC is present.

7.	Unit On:	This provides a 12V output when the amplifier is powered on. This can be used to
		turn on external audio equipment, or trigger a relay switching power strip.

8.Speaker Output: The speaker output attaches to the amplifier via a modular plug and provides 100 watts per channel output at 4 ohms.

9.AC Power Cord:The detachable AC power cord can be plugged into any grounded AC power source.

6