9
Once the audio outputs are set at Standalone, the T2FAM-EX
offers three methods for IR control. One is to take the IR
output of your control device using a mono 3.5mm patch cable
into the Direct IR input on the back panel of the T2FAM-EX.
Tuners A and B feature discrete commands, allowing both
tuners to be controlled independently from one input. The
second method for IR control is to attach an IR emitter over the
IR receiver on the front panel, and the third method is to aim
the remote control at the IR receiver located on the front
panel.
RS232 Serial Control
The T2FAM-EX features a bidirectional DB9 port for serial
control. This enables the tuner to be controlled via a third party
home automation system and will in turn issue present state
commands back to the controller. Potentially, all aspects of
NuVoNet communication can be emulated using the serial
control capability. The necessary protocol for serial use can be
downloaded from the NuVo website ProZone at
www.nuvotechnologies.com/prozone.