T2 AM/FM Configuration Software
Basic setup and operation of the T2 is easily done from the
front panel, the included T2RC3 remote, or the Concerto
Display Pad. The T2 package includes the T2 Configurator setup
software designed to quickly move you through the Tuners'
setup options in a methodical fashion, and allow access to the
more advanced setup features. Configurations are saved as
files in the software's “Config” folder. Once complete,
configurations can be used as templates for future
installations.
1.0 Start
The start tab allows you to load an existing configuration, or
create a new one. You can also retrieve a configuration from
the T2 and edit it.
1.0 Start
1.1 New Config
Page 22
1.1 After you have opened a configuration, the next step is the
Config Tab.
2.0 Config
The Config tab is for the initial setup, which determines basic
tuner operation.
2.1 NuVoNet Operating Mode: This drop down menu allows you
to select between “Stand-alone” or as a Concerto source 1- 6.
If you are using the T2 as NuVoNet source for Concerto, you
must select a unique, dedicated source input for each Tuner (A
or B) being configured.
2.1 NuVoNet Operating Mode