Nuvo NV-T2FX - page 21

IV. Using the T2 with the Concerto NuVoNet

Setting Up the Tuner for NuVoNet

The T2 must be set for one of the Concerto source

inputs 1-6. This can be done at the front panel when

the tuner is first turned on, in the T2 Configurator

software, or through the front panel advanced menu.

The best way to utilize the T2 with NuVoNet is to set

up the T2 options in the included Configurator

software, and then download the configuration

through the rear-panel RS232 port. It may be

necessary to use a USB to RS232 adapter, fig. 26.

We recommend the use of two readily available

modelsthat work well with our equipment. One is a

Radio Shack part number 26-183, and the other is part

number FSU103, manufactured by Belkin.

Making Sure Your Concerto Is Ready for NuVoNet Use

Your Concerto System must be updated with at least

software version 1.41 for proper NuVoNet

communication with the T2. To check what

Configurator version you currently have, open the

Concerto Configurator software on your computer by

double-clicking on the Configurator icon on the

desktop. You will see a splash screen appear before

the software opens. This lists the current software

version. If you do not have version 1.41 or later, go to

. There you can

log onto the Download page and download the latest

version.

When this is done, open the applicable configuration

from your configuration files or retrieve the

configuration from the Concerto main unit. Once the

appropriate configuration is opened, go to the Source

tab and place the T2 IR library in the appropriate

source locations 1-6,fig. 27. Once you have added the

T2 as two of the Concerto sources, you can then

download the configuration to the Concerto through

the RS232 port on the back of the Concerto. When the

download is complete, your system is ready for

www.nuvotechnologies.com/prozone

LOCKIM

DHOTKEY

MASTER

SEEK

TUNE

SCAN