NXP Semiconductors ISP1562, ISP1563 Contact information

NXP Semiconductors AN10050

Designing a Hi-Speed USB host PCI adapter using ISP1562/63

Application note Rev. 04 — 1 November 2007 2 of 18

Contact information

For additional information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

Revision history

Rev Date Description

04 20071101 Fourth revision. Corrected typo in Section 4: it is 2.5 inches ± 0.1 inch, not ± 1 inch.

Last line of Section 3.4.

03 20061212 Third revision. Updated Fig 6.

02 20060707 Second revision. Updated Section 5.

01 20051004 First release.

Contents

Main AN10050 Designing a Hi-Speed USB host PCI adapter using the ISP1562, ISP1563 Rev. 04 1 November 2007 Application note Contact information 1. Introduction 2. ISP1562/3 initialization 3. Description of the application schematics 3.1 Distribution of power sources and power management support NXP Semiconductors AN10050 3.2 Input clock: applies only to the ISP1563 3.3 Selecting the number of ports: applies only to the ISP1563 3.4 Subsystem vendor ID and subsystem device ID 3.5 Legacy support: applies only to the ISP1563 3.6 Overcurrent protection 4. PCB design recommendations 5. Schematics Fig 1. ISP1562 eval board schematic top level interfaces AN10050 AUX1V18 91 84 76 Fig 3. ISP1562 eval board schematic PCI edge connector Fig 4. ISP1562 eval board schematic port power control and ESD protection Fig 5. ISP1563 eval board schematic top-level interfaces ISP1563 Fig 6. ISP1563 eval board schematic ISP1563 not to be implemented FB7 is optional. Can be directly tied to ground. Designing a Hi-Speed USB host PCI adapter using ISP1562/63 Fig 7. ISP1563 eval board schematic PCI edge connector Fig 8. ISP1563 eval board schematic port power control and ESD protection 6. Legal information 6.1 Definitions 6.2 Disclaimers 6.3 Trademarks 7. Contents