Philips Semiconductors Product Specification
TOPFET high side switch PIP3209-R
5.5 V ≤ VBG ≤ 35 V, limits are at -40˚C ≤ Tmb ≤ 150˚C and typicals at Tmb = 25 ˚C unless otherwise stated.
Refer to TRUTH TABLE.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Overload protection VBL = VBG
IL(lim) Load current limiting VBG ≥ 9 V 6 9 12 A
Short circuit load protection
VBL(TO) Battery load threshold voltage1VBG = 16 V 8 10 12 V
VBG = 35 V 15 20 25 V
td sc Response time2VBL > VBL(TO) - 180 250 µs
Overtemperature protection
Tj(TO) Threshold junction 150 170 190 ˚C
temperature3
∆Tj(TO) Hysteresis - 10 - ˚C
SWITCHING CHARACTERISTICSTmb = 25 ˚C, 9 V ≤ VBG ≤ 16 V, for resistive load RL = 13 Ω.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
During turn-on to VIG = 5 V
td on Delay time to 10% VL-2840µs
dV/dton Rate of rise of load voltage 30% to 70% VL- 0.75 1 V/µs
t on Total switching time to 90% VL-6090µs
During turn-off to VIG = 0 V
td off Delay time to 90% VL-3654µs
dV/dtoff Rate of fall of load voltage 70% to 30% VL- 0.75 1 V/µs
t off Total switching time to 10% VL-6090µs
CAPACITANCESTmb = 25 ˚C; f = 1 MHz; VIG = 0 V. designed in parameters.
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
Cig Input capacitance VBG = 13 V - 15 20 pF
Cbl Output capacitance VBL = 13 V - 100 140 pF
Csg Status capacitance VSG = 5 V - 11 15 pF
1 The battery to load threshold voltage for short circuit protection is proportional to the battery supply voltage. After short circuit protection has
operated, the input voltage must be toggled low for the switch to resume normal operation.
2 Measured from when the input goes high.
3 After cooling below the reset temperature the switch will resume normal operation.
July 2001 6 Rev 1.000