THE WARNINGS AND PRACTICES SET FORTH ABOVE IN THE WATER- SPORTS SAFETY CODE REPRESENT SOME COMMON RISKS ENCOUN- TERED BY USERS. THE CODE DOES NOT PURPORT TO COVER ALL INSTANCES OF RISK OR DANGER. PLEASE USE COMMON SENSE AND GOOD JUDGMENT.

Please contact us if you have any questions on the proper selection, function, or safe use of this product. 1-800-6-OBRIEN

INFLATION AND ASSEMBLY

Begin by inserting the tube into its cover (when applicable) and aligning it as well as possible. When there are multiple air chambers inflate the smaller push-in valve(s) first and the large, screw-in (Boston) valve last. To inflate your tube, use any high volume, low-pressure inflator. Your O’BRIEN dealer can direct you to the O’BRIEN 12-volt inflator or any of the many foot pumps or hand pumps that are available. Some of the O’BRIEN inflatables come with large Boston valves that may be filled using either the pumps referred to above or your local gas stations air hose. When included, you will find it under the top cap of the large screw-in valve.

A towable tube comes with either a “Quick Connect” hook fitting a webbing strap or a section of rope at the towing end of the tube. These are for connecting your towline. Be sure the line is connected securely. Check it regularly between rides to avoid the dangers of a sudden disconnect.

MAINTENANCE OF YOUR TUBE

After use, clean debris from your tube by wiping it off or spraying it with fresh water. This is especially important if it has been used in salt water, or in an area where there has been exposure to oil or gasoline.

Never use harsh detergents to clean the tube. If you need more than water, use dish- washing detergent or a similarly mild cleansing agent.

Dry your tube and store it DEFLATED, in a cool, dry area. Storage in a very cold area could result in cracking of the vinyl tubes.

REPAIRS

Your tube is made of very durable materials; but you may get an occasional puncture. A repair kit is included with your O’BRIEN tube. To patch your tube, take the follow- ing steps:

1. Clean the area around the hole to remove any foreign matter. Mild detergent should suffice.

2. Cut a patch (round or oval shaped) from the patching material included in the repair kit. The patch must be somewhat larger than the hole.

3. Apply thin layer of glue to the patch and the area around the hole. Allow the glue to set on each for about 1 minute.

4. Position the patch over the hole and press down firmly on a flat surface. Remove any trapped air by rubbing the patch from the center outward.

5. Wait 24 hours to reinflate your tube.

Page 6 Page 8
Page 7
Image 7
O'Brien 2101505, 2101522, 2101523, 2101521, 2101517, 2101512, 2101503 Inflation and Assembly, Maintenance of Your Tube, Repairs
Page 6 Page 8

2081503, 2091527, 2091531, 2101520, 2101500 specifications

O'Brien's range of products, specifically models 2101505, 2101511, 2091511, 2101516, and 2091501, presents an impressive array of features tailored for both recreational and performance purposes. Each model is designed with modern users' demands in mind, delivering exceptional performance, durability, and user-friendly characteristics.

The O'Brien 2101505 is notable for its versatility and ease of use, making it ideal for beginners and seasoned enthusiasts alike. This model features advanced hydro-dynamic designs, ensuring minimal drag and smooth gliding over the water. Constructed with lightweight materials, it allows for easy maneuverability while still maintaining structural integrity during use.

The O'Brien 2101511 stands out with its enhanced stability and buoyancy, thanks largely to its innovative hull design. This model is engineered for ideal performance even in choppy waters, making it a favorite for water sport activities. It is also equipped with reinforced zones to withstand heavy impacts, catering to thrill-seekers looking for an adrenaline rush.

The 2091511 model focuses on providing superior grip and control, which is crucial for water sports enthusiasts. Its textured surface enhances traction, preventing slips even in wet conditions. Additionally, this model incorporates advanced technology for quick inflation and deflation, allowing for rapid setup and pack-up, perfect for spontaneous outings.

O'Brien's 2101516 is designed with performance in mind, featuring aerodynamically optimized shapes to enhance speed and responsiveness. This model is often favored by competitive users for its high-speed capabilities and smooth handling, allowing it to perform exceptionally well in racing scenarios.

Finally, the O'Brien 2091501 combines classic design elements with modern innovations, showcasing a balance between nostalgia and cutting-edge technology. Its robust construction ensures long-lasting durability while also providing an aesthetically pleasing appearance. This model is particularly suited for those who appreciate both form and function.

Overall, O'Brien's 2101505, 2101511, 2091511, 2101516, and 2091501 models highlight the brand's commitment to quality, performance, and user satisfaction. Each model is engineered with unique characteristics tailored to various users, ensuring that there is an ideal option for every water sport enthusiast.
Top Page Image Contents