3. Fan the paper.
4. Lift the paper bar (1) and load
paper (up to 500 sheets 20-lb. US
Bond). Keep the stack below the
full line (2).
5. Lower the paper bar and push the
tray back into the printer.
Note: To install paper in Tray 1:
a. Open the Tray 2 front panel.
b. Slide Tray 1 out.
AUTOFEED
To set the printer to switch to Tray 2 when
Tray 1 is empty:
Printers with Operator Panel
:
Set
AUTOTRAY
on in the Print Menu.
Printer with online Status Monitor
:
Go to the
Paper
tab in the Status Monitor.
Select
Auto Tra y Swit ch
.
Activate the Tray in the Printer Driver
Windows®
PCL Driver
1. Click Start → Settings → Printers
[Printers and Faxes for XP].
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the Oki printer icon,
then click Properties.
3. Click the Device Option(s) tab.
4. For Available Tray, select Lower
Cassette.
5. Click OK, then close the Printers
(Printers and Faxes) dialog box.
PostScript Emulation Driver,
(Printers with Postscript option
installed).
1. Click Start → Settings → Printers
[Printers and Faxes for XP].
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the Postscript
emulation printer icon, then click
Properties.
3. Next:
–Windows XP, 2000 and NT 4.0:
click the Device Settings tab.
–Windows Me and 98: click the
Device Options tab.
4. Then:
–Windows XP, 2000, NT 4.0 and
Me: under Installable Options,
click Available Tray and select 2.
–Windows 98: under Change
setting for Available Tray , select
2 (1 Optional Tray).
5. Click OK, then close the Printers
(Printers and Faxes) dialog box.
Macintosh®
PostScript Emulation Driver,
(Printers with PostScript option
installed)
OS 8.x and 9.x
1. Activate Chooser from the Apple
menu.
2. Select LaserWriter 8.
3. Click Printer → Setup.
4. Click Configure.
5. Change the Available Tray setting
to 2 (1 Optional Tray).
6. Click OK twice.
7. Close Chooser.
OS X.1
No activation is required for
Macintosh OS X.1.
OS X.2
1. Activate Print Center from Local
Hard Drive → Applications →
Utilities → Print Center.
2. Highlight the printer name and
select from the menu Printers →
Show Info.
3. Click the Available Tray
drop-down menu and select 2 (1
Optional Tray).
4. Click Apply Changes and exit to
the desktop.