4
Network Install: HardwareConnect to the Network Port
Note: No Ethernet® cable is supplied with the printer. Use an Ethernet cable
with two twisted wire pairs and an RJ45 plug.
□Turn the printer off.
□Remove the plug from the Ethernet port (1), then connect your Ethernet cable to the port.
□Connect the other end of the cable to the network port.
□Turn the printer on and wait for the print serve r’s STATUS light (2) to stop blinking.
□Press the TEST button (3) on the print server. The Network Information configuration sheets print.
Keep these sheets handy: they contain information you need to set up the printer on your network.