C7100/7300/C7500
Duplexer
Installation Instructions
Duplexer Part Number: 70040401
Phase 1 - Install
!If you will be using the duplex unit to print complicated files
with graphics, you need to pur- chase and install 64 MB additional printer memory (OKI # 70041001).
1.Unpack the duplex unit and remove any shipping materials.
2.Turn off the printer, then open the front cover.
3. Locate the slides inside the printer.
4.Place the duplex unit guide rails on the slides, then push the duplex unit all the way into the printer.
5. Close the front cover.
6. Turn on the printer.
Phase 2 - Activate the Duplex Unit in the Driver
WINDOWS® PCL DRIVER
1.Click Start — Settings — Printers. The Printers dialog box opens.
2.
(Windows 2000), Properties (Windows XP, Me, 98, 95) or
Document Defaults (Windows NT 4.0).
3.On the Paper tab, click Device options. Or, with Windows XP, select the Device Option tab.
4.Click Duplex option unit to select it, then click OK.
5.Click OK, then close the Printers dialog box.
WINDOWS POSTSCRIPT® DRIVER
1.Click Start — Settings — Printers. The Printers dialog box opens.
2.
3.Change the setting:
WINDOWS XP, 2000 AND NT 4.0:
a.Click the Device Settings tab.
b.Scroll down to Installable Options and click Duplex.
c.Under Change ‘Duplex’ Set- ting, click Installed.
WINDOWS ME, 98 AND 95:
a.Click the Device Options tab.
b.Click Duplex.
c.Under Change setting for: Duplex, click Installed.
4.Click OK, then close the Printers dialog box.
MACINTOSH® DRIVER (OSX)
1.As of OS 10.1.5, Apple has not enabled Printer Options adjustment. Therefore, this selection is unavailable.
MACINTOSH® DRIVER (CLASSIC)
1.Activate Chooser from the Apple menu.
2.Select LaserWriter 8.
3.Click Printer — Setup.
4.Click Configure.
5.Change the Duplex setting to
Installed.
6.Click OK twice.
7.Close Chooser.
58364601
