OkiLAN 8100e Internal Print Server

OkiLAN 8100e

Internal Print Server

Print Server Part Number: 70042101

1.Unpack the print server and remove any shipping materials.

2.Turn off the printer, and remove the power cord and interface cable.

3.Remove the access panel screw.

4. Lift off the access panel.

5. Install the print server:

the connector on the main board.

b.Press down until connectors are fully engaged.

c.Make sure the print server is securely installed.

6.Tighten the 2 screws at each end of the metal plate.

7. Snap off the access panel tab.

8.Replace the access panel:

a.Align panel tabs at bottom.

b.Swing panel up and in place.

c.Tighten the screw.

9.To perform a test, press the test button for 3 seconds. The self diagnostic test and configuration settings are printed.

To install the printer software and view the SoftNIC User’s Guide, see the CD-ROM included with your printer.

a.Align the connector at the bottom of the print server with

Oki Data Americas, Inc., Mt. Laurel, NJ 08054	58366101
http://www.okidata.com