24 – C710n User’s Guide
How to Change the Settings: Administrator __________________
You can set whether to ENABLE or DISABLE each category in the
user menu.
Disabled categories are not displayed in the User’s menu. Only a
system administrator can change these settings.
1. Turn OFF the printer. Turn ON the printer while pressing the
Enter button.
When Boot Menu appears, take your finger off the button.
2. Press the Enter button.
3. When Enter Password appears, press the up or down
MENU button, each time followed by Enter, then Enter
several times to input the 1st line of the your password, and
then press the Enter button.
Enter your 4 to 9 digit password.
(The default password is aaaaaa).
4. Press the Enter button.
5. Press the up and down MENU button until the “category”
you want to change is displayed.
6. When it is, press the Enter button.
7. Press the MENU up button or MENU down button until the
“item” you want to change is displayed.
8. When it is displayed, press the Enter button.
9. Using the MENU up button or MENU down button, identify
the parameter as required.
10. Press the Enter button to enter an asterisk (*) on the right
side of the setting selected.
11. Press the On Line button to switch to online. The machine
will automatically re-boot.