Storage Device Manager
Important!
•When attempting to open the application, ensure that the default printer is connected and turned on.
•If your default printer is a virtual printer, the application will return the error message “This utility does not support this interface.” Reset your default printer to a real printer.
Open SDM
Double click the local hard drive, then double click Okidata → SDM for Mac → Storage Device Manager for Mac.
From the main screen, you can set the default feed tray as well as paper sizes for the feed trays. You can also enable (the default) or disable the Auto Tray Switch feature.
Mac9 1 SDMforMac jpg
NOTE
Trays that are not installed are grayed out and disabled.
42