MB260
- 33 -
PC Features
license agreement.
8Click on the NEXT button.
9The final installation is ready to be executed. Click
on the INSTALL button.
The following screen appears to indicate the
progression of the installation.
10 Click on OK to finish the installation.
Your Companion Suite Pro kit is successfully installed on
your PC.
You can now connect your multifunction machine, refer to
paragraph Connections, page 35.
You can start the multifunction machine's management
software from the menu START > ALL PROGRAMS
> OKIDATA > COMPANION SUITE PRO LL2
> COMPANION DIRECTOR or by clicking on the icon
COMPANION - DIRECTOR located on your desktop.
Installing drivers only
This section describes the following installation
procedures:
• installation of drivers using the Companion Suite Pro
software,
• manual installation of drivers.

Installing the drivers using the Companion Suite

Pro software

Turn your PC on. Open an account session with the
administration rights.
1Open the CD-ROM drive, insert the installation CD-
ROM and close the drive.
2An installation procedure is automatically run (Auto
run). If it does not, double-click on setup.exe at the
CD-ROM's root.
3A screen titled COMPANION SUITE PRO LL2
appears. This screen allows you to install and
uninstall the software, access the product's user
guides or browse the CD-ROM contents.
4Place your cursor on INSTALL PRODUCTS and
confirm with left-click of the mouse.
5The Products Installation screen appears.
Place your cursor on CUSTOMIZED and confirm by
left-click with the mouse.
6Place your cursor on COMPANION SUITE PRO LL2
and confirm with left-click of the mouse.
7The welcome screen appears. Click on the NEXT
button to launch the installation of the Companion
Suite Pro kit on your PC.
8To continue, you need to accept the proposed
license agreement.