Super Speed Draft | Printer Reset |
To use Super Speed Draft (SSD), enter the Menu Mode and make changes as follows:
1Press SHIFT + SEL.
2Press GROUP twice.
3Press SET until DRAFT prints as the setting for the Print Mode.
4Press ITEM.
5Press SET (SSD prints).
6Press SHIFT + SEL to exit Menu Mode and save your changes.
When you reset the printer, you reinitialize it.
You will need to reset the printer to clear some error conditions
To reset the printer:
1Press and release the SEL key to take the printer
2Then, press and hold the SHIFT key and press the RESET (CHARACTER PITCH) key.
3The printer is reset.
!Important!
A printer reset is NOT the same as a reset to factory defaults.
A printer reset reinitializes the printer, but does NOT affect any menu settings.
A reset to factory defaults returns ALL menu settings to the factory defaults.
64 Microline 320/321 Turbo/n