56
Adjusting On Screen Displays (OSD)
OSD-DTV
Auto Scan
To automatically scan your channels, follow these steps:
1.Edit
2.Auto Scan
3.Manual Scan
The receiver scans Off-Air channels searching for both NTSC analog
and ATSC digital signals from channel 2 to channel 69. The percentage
bar shows the progress being made.
Once the digital TV signal is scanned, the channel number and the
program name are shown on the "Scan List".
It takes about three minutes to complete the entire scanning process.
Scanning ends on channel 69. When it is complete, you can press
"EXIT" to leave this window or press "MENU" to exit the menu system.
Press or buttons to highlight AUTO SCAN ,
and then press Enter. An AUTO-SCAN window
will display the SCAN status.