Oliso Freshkeeper 500 instruction manual troubleshooting, ProBLeM, thinGs to checK, soLution

troubleshooting

ProBLeM	thinGs to checK	soLution
Frisper is not working.	LED is on and green.	Plug in the AC Adaptor.
Sound is not present.
	Bag sensor is engaged.	Reposition the bag using the same pucture hole so
		that the bag sensor is covered. See page e.
	Lid is closed and locked.	Put your finger over the dots on Frisper and push
		down until you hear a click. See page .
Heat seal is incomplete. Using the wrong AC Adaptor		Use the supplied Oliso AC Adaptor.
	Bag and food is too wet.	Minimize food liquids. Pat dry raw meat. See pages
		1-1 for recommendations on handling food.
	Heat seal is too hot.	Wait at least  seconds between each use of Frisper.
Bag is leaking.	Existing seals are incomplete or	Re-seal the incomplete circle. Then find a new
	leaking. See page -10.	sealing circle to use. See page 10.
	Zipper is not securely closed.	Close the zipper securely. Run your fingers through
		the zipper-top. See page .

25