Setting the operation sound [BEEP]

s(Settings 2) X BEEP

Submenu 2

Application

 

 

 

Turns off or on the operating

OFF/ON

sound/warning sound of the

 

camera buttons.

Adjusting the brightness of the monitor [s]

s(Settings 2) X s

 

Submenu 2

Application

 

 

 

 

BRIGHT/

Selects the monitor brightness

depending on the surrounding

 

NORMAL

 

 

 

brightness.

 

 

 

Adjusting the CCD and the imageprocessing function [PIXEL MAPPING] Setting the date and time [X]

s(Settings 2) X PIXEL MAPPING

This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended.

For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again.

To adjust the CCD and the image processing function

Press the H button when [START] (Submenu 2) is displayed.

●The camera checks and adjusts the CCD and the image processing function at the same time.

s(Settings 2) X X

“Setting the date, time and time zone” (p. 12)

To select the date display order

1Press I after setting Minute, and use FG to select the date display order.

X

Y M D TIME

2010.02 .26 12 :30 Y/M/D

Date order

CANCEL MENU

SET OK

34EN