Olympus 227670 Press any button, t(Settings 3) X REC VIEW, t(Settings 3) X POWER SAVE, t(Settings 3) X PIC ORIENTATION, 3First turn on the TV, and then turn on the camera

For information on using the menus, see “Using the Menu” (p. 4).

To operate images with the TV remote control1Set [HDMI CONTROL] to [ON], and turn off the camera.

2Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 44)

3First turn on the TV, and then turn on the camera.

●Operate by following the operation guide that is displayed on the TV.

With some TVs, operations cannot be performed with the TV remote control even though the operation guide is displayed on the screen.

If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] and operate using the camera.

Saving battery power between shots[POWER SAVE]t(Settings 3) X POWER SAVE

	Submenu 2	Application
		Cancels [POWER SAVE].
	OFF
		When the camera is not being
ON		used for approx. 10 seconds, the
		monitor automatically turns off to
		save battery power.

To resume standby modePress any button.

Viewing the image immediately after shooting [REC VIEW]t(Settings 3) X REC VIEW

Submenu 2	Application
	The image being recorded is not
	displayed. This allows the user
OFF	to prepare for the next shot while
	following the subject in the monitor
	after shooting.
	The image being recorded is
	displayed. This allows the user to
ON
	make a brief check of the image
	that was just taken.

Even when set to [ON], you can resume shooting while the image is being displayed.

Automatically rotating images shot with the camera in a vertical position during playback [PIC ORIENTATION]

t(Settings 3) X PIC ORIENTATION

During shooting, the [y] (p. 38) setting on the playback menu is set automatically.

This function may not work properly if the camera is facing up or down during shooting.

Submenu 2	Application
	Information about the vertical/
	horizontal orientation of the
	camera during shooting is not
OFF	recorded with images. Images
	shot with the camera in a vertical
	position are not rotated during
	playback.
	Information about the vertical/
	horizontal orientation of the
	camera during shooting is
ON
	recorded with images. Images
	are automatically rotated during
	playback.

EN 45