Using the Variable Control Voice Actuator (VCVA)

Adjusting the VCVA start/stop actuation level

Move the MENU/VOL switch up or down while recording to adjust the VCVA start/stop actuation level (1 to 30). The higher the level, the more sensitive the VCVA is.

Note

The VCVA start/stop actuation level also varies depending on the selected microphone sensitivity mode. For information about microphone sensitivity, see page 26.

DictationMode UsingVariablethe

ERASE SP DICT

 

MENU

 

/VOL

ControloiceV

INDEX/

 

FOLDER

Actuator(VCVA)/

 

Dictation Mode

Simply pressing the SP DICT button sets up the recorder for dictating or for recording messages to be transferred to a PC for speech-to-text conversion using voice recognition software.

Dictation mode settings

Recording mode: SP

Microphone sensitivity: DICT

Alarm:OFF

To change settings from DICT mode, see the following pages:

To change recording mode: See P.25.

To change microphone sensitivity: See P.26.

To change alarm setting: See P.31.

.....................................................................

Notes

•Place the built-in microphone close to the speaker’s mouth (2 to 4 inches).

•Use of an optional ME12 noise-canceling microphone is recommended for recording with minimum ambient noise effects.

ERASE

SP DICT

MENU

 

 

 

 

 

/VOL

 

INDEX/

 

 

FOLDER

 

28