Charging the battery and installing the supplied computer software (ib)

After checking the system requirements, follow the instructions below to connect the camera to a computer, charge the battery, and install the supplied computer software (ib).

System requirements

Windows XP (Service Pack 2 or later)/

Windows Vista/Windows 7

If your system does not meet the system requirements or if you do not use a computer, charge the battery using the supplied USB-AC adapter. “Charging the battery with the supplied USB-AC adapter” (p. 12)

Connecting the camera

Indicator lamp

Multi-connector

USB cable (supplied)

Connector cover

Computer (on and running)

Charging the camera batteryThe camera battery can be charged while the camera is connected to a computer.

●The indicator lamp lights during charging and turns off when charging is complete.

Charging takes up to 3 hours.

If the indicator lamp does not light, the camera is not correctly connected or the battery, camera, or USB cable may be damaged.

Installing the computer software (ib)

For information on using the computer software (ib), see the software’s online help.

1 Insert the supplied CD in a CD-ROM drive.

●A setup screen will appear on the computer monitor.

If the setup window is not displayed, select “My Computer” (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the icon for the CD-ROM drive to open the setup CD window and then double-click “CameraInitialSetup.exe”.

2 Connect the camera to the computer.

If nothing is displayed in the camera monitor when the camera is connected, the battery may be exhausted. Leave the camera connected to the computer until the battery has charged, then disconnect and reconnect the camera.

3 Follow the on-screen instructions on your computer.

EN 11