Olympus PPO-E05 1. Name of Parts

zDo not expose this product to high temperatures for extended periods. This may lead to deterioration

of the product’s components.

zWhen mounting this product on the PT-E series waterproof case, be sure to follow the steps described

in this manual.

zBefore detaching this product from the PT-E series waterproof case, make sure that the case is

completely dry and free of moisture.

zNever attach or detach this product in locations where there is a lot of sand, dust or dirt. If any foreign

matter gets on the O-ring sections, the waterproof sealing will be compromised and water leakage

may result.

zThis product has been designed to be used underwater at depths up to 40 meters. Please note that

diving in depths over 40 meters may cause irreparable damage and/or may result in water leaking into

this product and the camera and lens.

zThe maximum depth that this product can be used is 40 meters, regardless of what case it is combined

with. For example, even when combined with a PT-E series case certified for 60 meters, the maximum

depth is still limited to 40 meters.

zWhen sealing this product, make sure that no foreign matter is caught on the O-rings or O-ring contact

surfaces.

zBefore storing this product, always remove it from the camera and lens.

zTo control lens zooming from this product, the provided zoom gear must be attached to the zoom ring

of the lens. Correctly attach the zoom gear to the zoom ring of the lens as instructed in this manual.

1. Name of Parts

1PPO-E05 main body

2Silicon O-ring (POL-E101)

3Front cap

4Rear cap

5Zoom gear (PPZR-E06)

6Grease for silicone O-ring

7O-ring remover

PPO-E05_EN-01.fm Page 2 Tuesday, March 20, 2007 6:55 PM