Olympus PT-016 manual Ｑ１１：Please tell me about repairs

・Do not use anticorrosion agents on the metal parts. The metal parts are made of aluminum, brass or stainless steel. Cleaning with pure water is sufficient.

・Do not use commercial defogging agents. Always use the original Olympus defogging silica gel.

・Do not use adhesive for repairs or other purposes. When repair is required, please contact a service station of our company or your dealer.

Ｑ１１：Please tell me about repairs.

Ａ１１：Please contact a service station of our company or your dealer, if repair should be necessary. Do not try to repair, disassemble or modify the Case yourself. Repair, disassembly or modification by you or third parties not authorized by Olympus invalidates the guarantee.

Ｑ１２：What are the model numbers of the PT-016 accessories?

Ａ１２：The following accessories are being sold.

（1）O-ring for the PT-016 body (POL-016): This is a silicone rubber O-ring packing to be installed in the PT-016 body to make it waterproof. O-rings for other Case models cannot be used.

（2）Silicone O-ring grease (PSOLG-1): This is a special grease for silicone O-ring maintenance.

（3）Silica gel (SILCA-5): This is a desiccant used to prevent fogging of the glass parts of the Case. The quantity is five bags.

（4）LCD hood (PFUD-03): This hood is installed on the LCD monitor window of the Case to make it easier to see the LCD monitor of the camera.

※You can order in large computer shops and camera mass sale stores.

※Please contact your dealer or a service station of our company when replacement is required. Replacement will be made against payment.

※With just the weight of the digital camera, the PT-016 has nearly neutral buoyancy in the sea. For use of the protector by itself, installation of a balance weight is not required.

E-33