Olympus PT-17 Perform the final checks, Visual Inspection

Perform the final checks.

Visual Inspection

After sealing the Case, check the sealing part of front and rear lid visually to confirm that the O-ring is not twisted or out of the groove and that no foreign matter has been caught.

CAUTION ：・Hairs, fibers, and other narrow items are not very apparent, but they may cause entry of water, so that special attention is required.

・When there is no operation of the digital camera for 3 minutes after it has been installed, the LCD goes out to save the battery, and when another 5 minutes pass without any operation, the lens is retracted and the camera enters into sleep mode (standby status). Return to operation status is made when the shutter button or any other button is pressed.

E-20

Contents

For the digital camera CAMEDIA D-560 Zoom/D-565Zoom Introduction Please read the following items before use For safe use WARNING ・Injury by dropping onto the body from a height parts have been swallowed Batteries For Prevention of Water Leakage Accidents Handling the Product Page Contents Contents 1.Preparations 2.Advance Check of the Case 4.Taking Pictures Under Water 5.Handling After Shooting 6.Maintaining the Waterproof Function・・・・・・・・・・・・・・・・・・・・・・・・・・・・�E-26 7.Appendix １. Preparations Check the contents of the package Names of the parts Install the strap Master the basic operation Holding the Case How to Press the Shutter How to Use the Zoom Lever 2. Advance Check of the Case Advance test before use Advance Test 3. Install the digital camera Check the digital camera Battery Confirmation Confirmation of the Remaining Number of Pictures to be Taken Remove the hand strap from the digital camera Loading in the Case Which digital cameras can be loaded Open the lens barrier Check the operation of the camera Open the Case Load the digital camera Insertion of silica gel Check the loading status Seal the Case Install the special balance weight Installation and Removal of the LCD Hood Installation Removal Mounting and Removing the Lens Cap Perform the final checks Visual Inspection Final Test 4. Taking Pictures Under Water How to Use the Hand Strap Take pictures carefully Confirm the picture on the LCD monitor Quietly press the shutter lever 5. Handling After Shooting Wipe off any waterdrop Take out the digital camera Wash the Case with pure water Dry the Case 6. Maintaining the Waterproof Function Remove the O-ring Remove any sand, dirt, etc Install the O-ring How to Apply Grease to the O-ring Replace consumable products 7. Appendix Q & A on the use of the PT-017 （a）Hitting other objects （b）Dropping （c）Placing heavy objects on top of the Case Ｑ４：What cautions must be observed when opening and closing the Case Ａ４：Pay special attention to the following items Ｑ６：How should I take pictures under water Ｑ７：How can I check for water leakage Ａ７：Ｑ８：What are the causes for entry of water Ａ８：Ｑ９：What are the important points for O-ringmaintenance Ａ９：Please observe the following items A thin, uniform coat produces the best result （4）The O-ringis a consumable product. Replace it at least once a year Ｑ１０：What are the important points for Case maintenance Ｑ１１：Please tell me about repairs Ｑ１２：What are the model numbers of the PT-017accessories Ａ１２：The following accessories are being sold ※You can order in large computer shops and camera mass sale stores After-saleService Specifications Diver's Insurance Guide Request for returning the user registration card Page OLYMPUS OPTICAL CO., LTD OLYMPUS AMERICA INC OLYMPUS OPTICAL CO. (EUROPA) GMBH