For information on using the menus, see “Setup menu” (p. 6).

When erasing pictures in the internal memory, do not insert the card into the camera.

Before erasing pictures from a memory card, insert the card into the camera.

Protected images cannot be erased.

To individually select and erase images [Sel. Image]

1Use FGto select [Sel. Image], and press the A button.

2Use HIto select the image to be erased, and press the A button to add a Rmark to the image.

●Turn the zoom lever to the W end to display an index view. Images can be quickly selected using the FGHIbuttons. Turn to the T end to return to the single frame display.

Sel. Image

5/30

Rmark

OK

Erase/Cancel MENU

3Repeat Step 2 to select the images to be erased, and then press the mbutton to erase the selected images.

4Use FGto select [Yes], and press the A button.

●The images with a Rmark are erased.

To erase all images [All Erase]

1Use FGto select [All Erase], and press the A button.

2Use FGto select [Yes], and press the A button.

Saving print settings to the image data [Print Order]
q (Playback menu) X Print Order

“Print reservations (DPOF)” (p. 58)

Print reservation can be set only for still images that are recorded to the card.

Protecting images [R]
q (Playback menu) X R

Protected images cannot be erased by [Erase] (p. 24, 46), [Sel. Image] (p. 47), or [All Erase] (p. 47), but all images are erased by [Memory Format]/[Format] (p. 48).

1Use HIto select an image.

2Press the A button.

●Press the A button again to cancel the settings.

3If necessary, repeat Steps 1 and 2 to protect other images, and press the mbutton.

Rotating images [y]
q (Playback menu) X y

1Use HIto select an image.

2Press the A button to rotate the image.

3If necessary, repeat Steps 1 and 2 to make settings for other images, and press the mbutton.

The new picture orientations will be saved even after the power is turned off.

EN 47