Olympus 227665, SP-800UZ Sequential shooting (Drive), Pictures are taken sequentially while the shutter button is held down, Timelapse shooting

Sequential shooting (Drive)

Pictures are taken sequentially while the shutter button is held down.1 Select the drive option in the shooting function menu.

		0.0
		WB
		AUTO
		ISO
		AUTO
		SEQUENTIAL
	Option	Description
	o	One frame is shot each time the
	o	shutter button is pressed.
		shutter button is pressed.
		Take sequential shots using the
	j*1	focus, brightness (exposure) and
		white balance set in the ﬁrst frame.
	c	The camera takes sequential shots
	c	at a faster speed than in [j].
		at a faster speed than in [j].
	d	The camera takes sequential shots
	d	at approximately 10.2 frames/sec.
		at approximately 10.2 frames/sec.
	B	The camera takes sequential shots
	B	at approximately 15.2 frames/sec.
		at approximately 15.2 frames/sec.
	i	Sequential shooting while
	i	adjusting the focus for each image.
		adjusting the focus for each image.
		Sequential shooting that
		automatically changes the
	7	exposure for each frame while
	7	using the focus and white balance
		using the focus and white balance
		that were locked at the ﬁrst frame
		(Bracket shooting). “7” (p. 33)
		The camera takes sequential
	TIMELAPSE	shots automatically for the number
	TIMELAPSE	of pictures and interval speciﬁed.
		of pictures and interval speciﬁed.
		“SET TIME LAPSE” (p. 34)

*1 The shooting speed varies depending on the settings for “image quality” (p. 30).

When set to [j], the ﬂash (p.26) cannot be set to [REDEYE]. In addition, when set to [c], [d] or [B] the ﬂash is ﬁxed to [FLASH OFF].

[IMAGE SIZE] is limited to [n] or lower when set to [c] or [d], and to [2] or lower when set to [B]. The ISO sensitivity is ﬁxed at [ISO AUTO] in both cases.

Setting of recording sound when shooting still images (R) is disabled when taking sequential shots.

Timelapse shooting

Once the shutter button is pressed, the ﬁrst shot will be taken, and subsequently all other shots will be taken automatically. The camera automatically enters sleep mode after the ﬁrst frame has been saved. Sleep mode is exited around 7 seconds before the next shot. Once the preset number of frames is taken, the camera automatically turns off.

Use of charged batteries or an AC adapter is recommended when taking frames over an extended period of time.

If any of the following operations are performed while the camera is in sleep mode, the camera cancels timelapse mode and returns to normal shooting: opening of the battery/card compartment cover, connecting the camera to a computer, pressing the shutter button or wheel controller.

If the internal memory or card or the battery power runs out during timelapse mode, a warning is displayed, [TIMELAPSE] mode is canceled and the camera automatically turns off.

EN 29