•If NiMH batteries are not charged within the specified time, stop charging them and do not use them.
•Do not use a battery if it is cracked or broken.
•If a battery leaks, becomes discolored, deformed or becomes abnormal in any other way during operation, stop using the camera.
•If a battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately.
•Never subject batteries to strong shocks or continuous vibration.
Caution for Usage Environment•To protect the
•Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight, beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers.
•In sandy or dusty environments.
•Near flammable items or explosives.
•In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, read their manuals as well.
•In places prone to strong vibrations.
•Never drop the camera or subject it to severe shocks or vibrations.
•When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist the camera.
•Do not touch electric contacts on cameras.
•Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage, color failure, ghosting on the CCD, or may possibly cause fires.
•Do not push or pull severely on the lens.
•Before storing the camera for a long period, remove the batteries. Select a cool, dry location for storage to prevent condensation or mold from forming inside the camera. After storage, test the camera by turning it on and pressing the shutter button to make sure that it is operating normally.
•The camera may malfunction if it is used in a location where it is subject to a magnetic/electromagnetic field, radio waves, or high voltage, such as near a TV set, microwave, video game, loud speakers, large monitor unit, TV/radio tower, or transmission towers. In such cases, turn the camera off and on again before further operation.
•Always observe the operating environment restrictions described in the camera’s manual.
Battery Handling Precautions
•Olympus NiMH batteries (included in some areas) are intended for use only with Olympus digital cameras. Never use these batteries with any other device.
•Always charge NiMH batteries (included in some areas) before using them for the first time, or if they have not been used for a long period.
•Always charge sets of batteries (included in some areas) (2 or 4) together.
•Do not use alkaline batteries unless it is absolutely necessary. In some cases, alkaline batteries may have a shorter service life than NiMH. Alkaline battery performance is limited, especially at low temperatures. The use of NiMH batteries is recommended.
•AA manganese
•When operating the camera with battery power at low temperatures, try to keep the camera and spare batteries as warm as possible. Batteries which run down at low temperatures may be restored after they are warmed at room temperature.
•Recommended temperature ranges for NiMH batteries: Operation....................................... 0°C to 40°C (32°F to 104°F) Charge........................................... 0°C to 40°C (32°F to 104°F)
•Using, charging or storing the batteries outside these ranges could shorten battery life or affect battery performance. Always unload the batteries from the camera before storing the camera for a long period.
•Before using NiMH batteries, always read the provided instructions.
•The number of pictures you can take may vary depending on the shooting conditions or batteries.
•Before going on a long trip, and especially before traveling abroad, purchase an ample supply of extra batteries. The recommended batteries may be difficult to obtain while traveling.
•Please recycle batteries to help save our planet’s resources. When you throw away dead batteries, be sure to cover their terminals and always observe local laws and regulations.
LCD Monitor•Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playback mode failure or damage to the monitor.
•A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.