Charging the battery with the included USB-AC adapter

The included USB-AC adapter (F-2AC) (hereafter referred as AC adapter) has been designed to be used for charging and playback. Make sure that shooting is not being used while the AC adapter is connected to the camera.

Example: AC adapter with an AC cable

1

Multi-connector

2

USB cable (supplied)

1

AC outlet

3

When connecting the camera to the computer via USB cable, face the lens downward.

2

STYLUS TOUGH-8010/μ TOUGH-8010

Indicator lamp

On: Charging

Off: Charged

STYLUS TOUGH-6020/μ TOUGH-6020

Indicator lamp

On: Charging

Off: Charged

STYLUS TOUGH-3000/μ TOUGH-3000

Indicator lamp

On: Charging

Off: Charged

The battery is not fully charged at shipment. Before use, be sure to charge the battery until the indicator lamp turns off (STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-6020/μ TOUGH-6020: up to 3 hours, STYLUS TOUGH-3000/

μTOUGH-3000: up to 2.5 hours).

If the indicator lamp does not light, the AC adapter is not connected to the camera correctly, or the battery, camera, or AC adapter may be broken.

For details on the battery and the AC adapter, see “Battery, USB-AC adapter (included), Charger (sold separately)” (p. 63).

Battery can be charged by connecting the camera to the computer. However, when charging with the system other than Windows XP (SP2 or later)/Windows Vista/ Windows 7, charging takes much time.

When to charge the batteriesCharge the battery when the error message shown below appears.

Flashes in red

BATTERY EMPTY

4 14M

Monitor top left

Error message

EN 13