Olympus Tap the left, side of the camera once, t(Settings 3) X TAP CONTROL, Tap the right side of the camera once, Operating during playback mode

For information on using the menus, see “Using the Menu” (p. 4).

To adjust the altitude/water depth display

1Use FG to select the current altitude/water depth, and press the Abutton to set.

CALIBRATE

1200 m

BACK MENU SET OK

Operating the camera by tapping the body [TAP CONTROL]

(STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only)

t(Settings 3) X TAP CONTROL

	Submenu 2	Application
		Cancels [TAP CONTROL].
	OFF
ON		[TAP CONTROL] is activated.
CALIBRATE		Adjusts the tap strength and intervals between multiple taps on each side of the camera
		body. (top, left, right, & back)

Operating during shooting mode (Example: Flash mode)

1Tap the right or left side of the camera body once. Then tap the top side of the camera once.

●The flash mode selection screen is displayed.

2Tap the right or left side of the camera body to select a function.3Tap the back of the camera body twice to confirm your selection.

P

FLASH AUTO

0.0

WB

AUTO

ISO

AUTO

4 14M

Tap the camera firmly using the pad of your finger.

When the camera is stabilized on a tripod for example, tap control may not work properly.

To prevent dropping the camera when using tap control, strap the camera to your wrist.

Operating during playback mode

When switched to playback mode by tapping the top of the camera body twice, the operations below can be used.

Display next image: Tap the right side of the camera once.Display previous image: Tap the leftside of the camera once.Fast forward and reverse: Tilt the camera to the right or the left.

EN 51