hChanging play speed

The playback speed of the file can be changed between 0.5 and 2 times speed. Change the speed according to need such as listening to meeting content at a fast speed or reviewing spots that you couldn't catch in a language lesson at a slow speed.

1Press the `OK/MENU button to start playback.

2While the recorder is during playback mode, press the `OK/MENU button to open the playback speed adjustment display.

3Press the + or − button to adjust the playback speed.

• [x1.0 Play] (Normal playback) Playback at normal speed.

3[x0.5 Play] – [x0.9 Play] (Slow playback) Playback speed slows down.

[x1.1 Play] – [x2.0 Play] (Fast playback) Playback speed becomes faster.

4Press the `OK/MENU button to complete the setting.

•If you leave the recorder for 3 seconds, the setting will be applied and the recorder will return back to the original screen.

Even if playback is stopped, the changed playback speed will be retained. The next playback will be at that speed.

Note:

•As in normal playback mode, you can stop playback, cue a file, or insert an index mark in slow playback and fast playback modes as well.

hPlayback through earphone

 

An earphone can be connected to the EAR jack of the

To EAR jack

recorder for listening.

 

• When the earphone is used, the recorder speaker will be

 

switched-off.

 

Notes:

 

• To avoid irritation to the ear, insert the earphone after turning

 

down the volume level.

 

• When you listen with the earphone during playback, do not

 

raise the volume too much. It may cause hearing impairment

 

and decrease in hearing ability.

hSetting an index mark or a temp mark

If index marks and temp marks are placed, you can quickly find a location you want to listen to in fast forward and fast rewind and when cuing a file. Index marks cannot be placed on files created on machines other than this recorder, but temp marks can be placed instead to temporarily remember desired locations. Temp marks are temporary markings. They will be automatically erased if you move to another file or connect the recorder to a computer.

1While the recorder is during recording mode or playback mode, press the FOLDER/INDEX/SCENE button.

• Even after an index or temp mark is placed, recording or playback will continue so you can place index or temp marks in other locations in a similar manner.

Clearing an index mark or a temp mark:1Locate the index or temp mark you want to clear.

- 7 -