Preparing the Camera

Inserting the battery and the SD/SDHC memory card (sold separately)

Always use SD/SDHC memory cards with this camera. Do not insert any other types of memory card.

1 2

1

Battery/card compartment cover

2

Insert the battery by putting in the ▼ marked side first, with the B (FE-4040)/ C (FE-4020/X-940) mark toward the battery lock knob.

Damage to the battery exterior (scratches, etc.) may produce heat or an explosion.

Insert the battery while sliding the battery lock knob in the direction of the arrow.

Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery.

Turn off the camera before opening the battery/card compartment cover.

When using the camera, be sure to close the battery/card compartment cover.

Insert the card straight until it clicks into place.

Do not touch the contact area directly.

FE-4040FE-4020/X-940

Battery lock knob

Write-protect switch

Contact area

3 1

2

This camera allows the user to take pictures using the internal memory even when no SD/SDHC memory card (sold separately) is inserted. “Using an SD/SDHC memory card” (p. 47)

“Number of storable pictures (still images)/ Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 49)

To remove the SD/SDHC memory card

12

Press the card in until it clicks and comes out slightly, then grab the card and pull it out.

10EN