2.0 Operation Procedure |
2.1 Drawing of Unit |
Actual Dimensions: 195mm(H) x 92mm(W) x 53mm(D) |
3 |
2.2 Descriptions of Buttons and Switches
/
Buttons
Temperature is displayed in either degrees Celsius(°C) or degrees Fahrenheit(°F). When the thermometer is turned on, it is set to the temperature scale that was in use when the thermometer was last turned off. To change the temperature scale, press the °C or °F key.
Button
Press “ 
” button to toggle the on and off backlight. The backlight will
Button (HOLD Mode)
Press the HOLD key to enter the Data Hold mode, the “HOLD” annunciator is displayed. When HOLD mode is selected, the thermometer will hold the present reading and stop all further measurements.
Pressing the HOLD key again will cancel HOLD mode causing the thermometer to resume taking measurements.
Button (K/J/T/E Input Thermocouple Type Selection)
The TYPE key allows for selection of J, K, E or T thermocouple types as either the input or simulated output. To select thermocouple type press type key once. Unit will briefly show 1888 and beep and then the type of thermocouple selected will be indicated on the left hand side of the display. Continue pressing the type key to step through the thermocouple types until desired type is indicated.
4
