Omega RS-232 manual Operating System Installation, OMG-USB-232-1, Page

Installation

Installation

Operating System Installation

Choose Install Software at the beginning of the CD and select the Serial I/O software drivers and install SeaCOM.

System Installation

The screen captures below are taken from a Windows ME installation. Your particular operating system may differ slightly from what is shown based on your version of Windows.

The OMG-USB-232-1can be connected to any Upstream Type “A” port either at the PC host or an Upstream Hub. The OMG-USB-232-1is hot-pluggable, meaning there is no need to power down your computer prior to installation. The OMG-USB-232-1requires no user hardware configuration since there are no jumpers present on the card.

1.Connect OMG-USB-232-1to an Upstream Host or Hub.

This indicates that the system has recognized the new device and will now proceed to locate a driver.

OMG-USB-232-1 Page 2