Encore Software for the OMB-NET6000 Series

Introduction

Encore is interactive measurement software designed for acquiring, analyzing, logging, and viewing data from Omega Engineering OMB-NET6000 Series data acquisition devices. No programming is required. This document shows you how to perform the following tasks with Encore software:

Acquire data from an analog input channel

Log the data

Play back the logged data

Analyze the signal

Export the data

System Requirements

The system requirements are based on acquiring and logging data from all 12 channels of an OMB-NET6220 device that is running at 100 kHz (1.2 MS/s).

PC

Minimum Requirements:

oCPU: Intel® Pentium® 4, 3.0 GHz or equivalent

oRAM: 1 GB

oMonitor: 1024 by 768 screen resolution

Recommended Requirements:

oCPU: Intel CoreTM 2 Duo Family

oRAM: 2+ GB

oMonitor: 1024 by 768 screen resolution

Operating system

The following Windows operating systems are supported:

Windows 7 (32-bit or 64-bit)

Windows Vista (32-bit or 64-bit)

Windows XP SP2 (32-bit)

Windows 2000 SP4

Installing Encore software

Complete the following steps to install Encore software:

1.Close all running applications on the host PC.

2.Insert the Encore CD into your CD drive and wait for the installation program to start.

If the installation program does not start automatically, navigate to the root of the CD and double-click

Install.exe.

3.Follow the instructions on the installation dialog boxes.

In addition to Encore software, the installation CD includes the Encore Help file, readme, and hardware user's guides for OMB-NET6000 Series device.

Installing OMB-NET6000 Series hardware

Refer to the Quick Start booklet that shipped with your OMB-NET6000 Series device or to the hardware user’s guide for information about connecting the hardware to your system.

3