Omega Engineering U24Y101 instruction sheet M1426/1106, Unpacking, Installation Operation

Models: U24Y101

1 2
Download 2 pages 63.26 Kb
Page 1
Image 1

U24Y101

POWER SUPPLY

M1426/1106

INSTRUCTION

SHEET

Shop online at: omega.com e-mail: info@omega.com

For latest product manuals: omegamanual.info

OMEGA’s U24Y101 24 VDC Power Supply provides low cost DC power suitable for driving process current loops, transducers, relays, electro- mechanical timers, and small motors. All components are rated to insure high reliablility, and built-in fusing prevents damage due to short-circuits or prolonged overloading.

There are two models: U24Y101 for 120 Vac power; U24Y101-220for 220 Vac power Either model can be converted to the other by a solder pad change which is explained below.

UNPACKING

Remove the packing list and verify that all equipment has been received. If there are any questions about the shipment, please call OMEGA Customer Service Department at

1-800-622-2378 or (203) 359-1660. Upon receipt of the shipment, inspect the container and equipment for any

signs of damage. Take particular note of any evidence of rough handling in transit. Immediately report any damage to the shipping agent.

NOTE

The carrier will not honor any claims unless all shipping material is saved for their examination. After examining and removing contents, save packing materials and carton in the event reshipment is necessary.

INSTALLATION AND

OPERATION

The U24Y101 is provided with a predrilled base plate for surface mounting. the power supply should be mounted in an open area with unrestricted air movement. Connections for AC power and DC output are made via the four position terminal block. The power can be 120 or 220 VAC and is user selectable by means of internal jumpers.

CAUTION — MAKE ALL CONNECTIONS BEFORE APPLYING POWER!

HOW TO CHANGE INPUT VOLTAGE

1.Remove the screws securing the bottom covers to gain access to the printed circuit board.

2.Locate the three solder jumpers shown in Fig. 1.

a)For 120 VAC operation install solder jumpers at locations A & B and remove jumper C.

b)For 220 VAC remove solder jumper from A & B and install solder jumper at C.

3.Relabel unit to reflect power change.

SPECIFICATIONS

Input Power:

120 VAC (Std) or

 

220 VAC (Opt) ± 10%

Output Voltage:

24 VDC ± 5%

Output Current:

1 Amp (max)

Load/Line Regulation:

± 2%

Output Protection:

Current Limited and

 

Thermal Limited

Input Protection:

0.5 Amp Fuse

Operating Temp:

–20 to 60 Deg. C

Storage Temp:

–30 to 70 Deg. C

Size:

See Fig. 2

Printed Circuit Board

A

3.00

C

B

Figure 1

 

 

 

7.625

 

 

 

LINEAR POWER SUPPLY

OMEGA

 

FUSE

1

2

3

4

MODEL U24Y101

 

 

made in USA

 

 

 

7.00

TERMINAL BLOCK

 

NOTES:

CONNECTIONS

 

 

1.

AC IN

ALL DIMENSIONS IN INCHES

2.

AC IN

CASE HEIGHT: 2.520"

3.

DC OUTPUT (+)

4.

DC OUTPUT (--)

(Add for Terminal Block)

.150

.150

2.25

.150 Dia.

4 PLS

Figure 2

Page 1
Image 1
Omega Engineering U24Y101 instruction sheet M1426/1106, Unpacking, Installation Operation, HOW to Change Input Voltage