Manuals / Omega Speaker Systems / Computer Equipment / Power Supply

Omega Speaker Systems iDRN-PS-1000 manual Safety Considerations, Unpacking & Inspection

Models: iDRN-PS-1000

1 20
Download 20 pages 9.93 Kb
Page 5
Image 5

SAFETY CONSIDERATIONS 2

This device is marked with the international Caution symbol. It is important to read this manual before installing or commissioning this device as it contains important information relating to Safety and EMC (Electromagnetic Compatibility).

Unpacking & Inspection

Unpack the instrument and inspect for obvious shipping damage. Do not attempt to operate the unit if damage is found.

This instrument is a DIN rail mount device. Installation of this instrument should be done by Qualified personnel. In order to ensure safe operation, the following instructions should be followed.

This instrument has no power-on switch. An external switch or circuit-breaker shall be included in the building installation as a disconnecting device. It shall be marked to indicate this function, and it shall be in close proximity to the equipment within easy reach of the operator. The switch or circuit-breaker shall not interrupt the Protective Conductor (Earth wire), and it shall meet the relevant requirements of IEC 947–1 and IEC 947-3 (International Electrotechnical Commission). The switch shall not be incorporated in the mains supply cord.

Furthermore, to provide protection against excessive energy being drawn from the mains supply in case of a fault in the equipment, an overcurrent protection device shall be installed.

•The Protective Conductor must be connected for safety reasons. Check that the power cable has the proper Earth wire, and it is properly connected. It is not safe to operate this unit without the Protective Conductor Terminal connected.

•Do not exceed voltage rating on the label located on the top of the instrument

housing.

•Always disconnect power before changing signal and power connections.

•Do not use this instrument on a work bench without its case for safety reasons.

•Do not operate this instrument in flammable or explosive atmospheres.

•Do not expose this instrument to rain or moisture.

•Unit mounting should allow for adequate ventilation to ensure instrument does not exceed operating temperature rating.

•Use electrical wires with adequate size to handle mechanical strain and power requirements. Install without exposing bare wire outside the connector to minimize electrical shock hazards.

EMC Considerations

•Whenever EMC is an issue, always use shielded cables.

•Never run signal and power wires in the same conduit.

•Use signal wire connections with twisted-pair cables.

•Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems persist.

3

Page 4 Page 6
Page 5
Image 5
Omega Speaker Systems iDRN-PS-1000 manual Safety Considerations, Unpacking & Inspection
Page 4 Page 6

iDRN-PS-1000 specifications

The Omega Speaker Systems iDRN-PS-1000 is a high-performance audio solution that stands out in the competitive landscape of professional sound systems. Designed to deliver exceptional sound quality, this speaker system integrates cutting-edge technologies and innovative features to cater to both live events and installed audio environments.

At the heart of the iDRN-PS-1000 is a powerful amplifier that ensures optimal sound reproduction across a wide frequency range. The system boasts a robust 1000-watt output, allowing it to fill large venues with rich, immersive sound. Its advanced digital signal processing (DSP) capabilities enable precise tuning of audio signals, ensuring that every nuance of sound is captured faithfully and delivered with clarity.

The iDRN-PS-1000 features a unique dual-driver configuration, which includes a high-efficiency woofer for deep bass response and a high-frequency driver that delivers crisp, detailed highs. This combination allows the system to handle a diverse range of audio content, from full-bandwidth music to impactful theater soundtracks. Enhanced with a wide dispersion pattern, the speakers ensure that audiences across the entire venue enjoy a balanced listening experience.

Built with durability in mind, the iDRN-PS-1000 is housed in a rugged enclosure that resists wear and tear, making it suitable for both portable use and permanent installations. Its lightweight design facilitates easy transportation and setup, while integrated rigging points provide flexible mounting options for various applications.

Connectivity is another strong point of the iDRN-PS-1000. The system features multiple input options, including XLR, TRS, and RCA connectors, enabling seamless integration with various audio sources. Additionally, built-in Bluetooth allows for wireless connection, enhancing convenience for users who wish to stream music directly from their devices.

Overall, the Omega Speaker Systems iDRN-PS-1000 represents a significant advancement in speaker technology, combining power, versatility, and reliability. With its impressive output, sophisticated DSP, and user-friendly features, it stands as an ideal choice for audio professionals seeking to elevate their sound experience. Whether for concerts, corporate events, or home use, the iDRN-PS-1000 will undoubtedly deliver an outstanding performance, making it a valuable asset in any sound reinforcement setup.