5
/ / Input Selections
The input selection indicates which input is selected; T1 thermocouple, T2
thermocouple or the difference between the two thermocouples (T1-T2).When
the thermometer is turned on, it is set to the temperature input that was in use
when the thermometer was last turned off.
Selector Switch
The circular selector switch is used to turn the unit off (!) or to select Reading
Mode (Input) or Simulation Mode (Output). There are nine selector switch
positions under output which provide rough adjustment of the simulated output.
Adjust
Course and fine adjustment Dials are used in Simulation Mode to allow a particular
simulated temperature to be selected once the output has been adjusted close to
the desired temperature using the selector switch.