Card Setup

Interrupt Modes

Headers E9 and E10 select the interrupt modes for each port. Each port must be set in the correct mode to insure proper installation. E10 sets Port 1 and E9 sets Port 2

N’ indicates the (N)ormal, single interrupt per port mode. ‘S’ Indicates the (S)hared interrupt mode, which allows more than one port to access a single IRQ. Any two or more ports can share a common IRQ by placing the jumpers on the same IRQ setting, and setting the appropriate selections at E1. Consult your particular software for IRQ selection. If no interrupt is desired, remove the jumper. ‘M’ indicates the inclusion of a 1K ohm pull-down resistor required on one port when sharing interrupts.

E10

N

S

M

E9

 

 

N

S

M

Figure 4 - Headers E9 and E10, Normal IRQ Mode

Set the jumpers to ‘S’ for shared interrupt mode on all blocks sharing an IRQ except one. Set that port block for ‘M’. This provides the pull-down resistor circuit that makes sharing of IRQs possible. If you are using more than one OMG-COMM2-EXor a compatible adapter in a bus you should only have one port set to ‘M’. The following example shows both ports sharing a single IRQ.

E10

 

 

N

S

M

E9

 

 

N

S

M

Figure 5 - Headers E9 and E10, Shared IRQ Mode

OMG-COMM2-EX

Page 4

Page 8
Image 8
Omega Vehicle Security OMG-COMM2-EX manual Interrupt Modes, E10

OMG-COMM2-EX specifications

The Omega Vehicle Security OMG-COMM2-EX is a state-of-the-art vehicle security system designed to offer unparalleled protection and convenience for vehicle owners. This cutting-edge system integrates advanced technologies and features that ensure optimal safety and usability.

One of the standout features of the OMG-COMM2-EX is its robust two-way communication capability. This allows users to remotely control and monitor their vehicles through a user-friendly interface. The system employs a high-frequency radio signal which provides reliable communication over extended distances, making it ideal for urban environments where traditional methods may falter.

The OMG-COMM2-EX system is equipped with a comprehensive security suite that includes perimeter monitoring, motion detection, and shock sensors. These sensors work together to detect unauthorized entry or tampering with the vehicle, alerting the owner immediately via notifications on their mobile device. The system's response is rapid, providing an extra layer of security that can deter potential thieves effectively.

Another noteworthy characteristic of the OMG-COMM2-EX is its easy installation process. Designed with usability in mind, this system can be fitted into a wide variety of vehicles without the need for extensive modifications or complex wiring. Coupled with a detailed installation guide, vehicle owners can have peace of mind knowing that their system is installed correctly, enhancing overall security.

In addition to its security features, the OMG-COMM2-EX also offers convenience through its integration with smart devices. Users can control various functions such as remote start, keyless entry, and vehicle immobilization from their smartphones, making daily operations seamless. The system also offers programmable features, allowing users to customize the alerts and notifications they receive based on personal preferences.

The technology behind the OMG-COMM2-EX includes advanced algorithms that enhance the accuracy of its sensors, reducing false alarms and enhancing reliability. This aspect is particularly important for urban users who may face environmental challenges that could trigger less sophisticated systems.

Overall, the Omega Vehicle Security OMG-COMM2-EX offers a compelling combination of security, convenience, and advanced technology. With features designed to protect vehicles from theft while providing ease of use for owners, it represents a significant advancement in vehicle security solutions. The integration of smart technology enhances user experience, making the OMG-COMM2-EX an excellent choice for anyone looking to safeguard their vehicle effectively.