Infrared Thermometer
give inaccurate readings. Please note this during applications.
•Maintenance
Blow off loose particles using a lens blow. Gently brush remaining debris away with a lens brush. Carefully wipe the surface with a moist cotton swab. The swab may be moistened with water.
NOTE: Don’t use solvents to clean the lens.
•Replace Battery
When the battery voltage drops below that required for reliable operation, the low battery
symbol 
will appear, indicating it is the time to replace the battery.
To change the 9V battery, detach the battery compartment cover by pushing the engraved pattern on the handle and pull down. Change the 9V battery with new one and put the battery cover back.
CAUTION
LASER RADIATION -
DO NOT STARE INTO BEAM
OUTPUT < 1mW AT 630 670mm
CLASS II LASER PRODUCT
OPEN
6
