Omnimount PLAY40 manual Placement of Arm on the Wall, Instructions

STEP 1 - Placement of Arm on the Wall

1INSTRUCTIONS

1.MOUNTING CONSIDERATIONS:

•Wall Mount Bracket MUST be attached to a stud or solid concrete. DO NOT attach this product to hollow wall or any other configuration.

•Make sure Arm will have desired unobstructed range of motion: up-down, side-to-side, in-out (see section RANGE OF MOTION).

•Make sure cables will reach their destinations with enough remaining slack to allow Arm full range of motion.

•Use the RANGE OF MOTION section to familiarize yourself with the movements of this product. Take into account that the TV will change location from Side-to-Side when pulled out from the wall.

•Use the SPACE REQUIREMENTS section for maximum measurements of this products full range of motion.

•If there is no available stud for desired TV location, you may want to insert horizontal studs into your wall at the desired mounting location (see “Horizontal Studs” image below).

2.CHOOSE YOUR DESIRED TV LOCATIONS:

Choose your desired TV locations when stowed and extended. Note the TV will move side-to-side when pushing it into and pulling it out from the wall as well as lifting it up and lowering it down. This step requires an understanding of this products Range of Motion (see section RANGE OF MOTION).

3.CHOOSE AN AVAILABLE WALL MOUNTING LOCATION: Find an available stud or area of solid concrete to attach the Wall Mount Bracket to that will allow your TV to be stowed and extended as desired.

Place the Template on the wall. When the Wall Mount Bracket on the Template is lined up with the mounting location on the wall (stud or concrete), the ‘TV ARC’ lines will show you the available locations of the center of your TV when stowed against the wall.

Once you’ve lined up the mounting location to a stud or solid concrete that will place your TV in your desired locations, use a punch to mark your wall at the 2 Mounting Hole locations on the Template. Then remove the template from the wall.

top

top

front

Horizontal Studs	If there is no available stud for
	desired TV location, you may
	want to insert horizontal studs
	into your wall at the desired
	mounting location.

front

RANGE OF MOTION

Arm Fully Extended from Wall
Full Up			In the Center
side	front	top	side

front

Full Down

topside

front top

Arm Flat Against Wall (to the left)
Full Up			In the Center
side	front	top	side
Arm Flat Against Wall (to the right)
Full Up			In the Center
side	front	top	side

front

front

Full Down

topside

Full Down

topside

front top

front top

SPACE REQUIREMENTS

Distance from the Wall

side

24.5” (622 mm) + Thickness of TV

18.19” (462 mm) + Thickness of TV

Horizontal Space Requirements 33.76” (858 mm) + Width of TV*

Vertical Space

Requirements

20” (508 mm) + Height of TV*

front

*Space requirement dimensions assume mounting holes are centered on the TV.

PN:888-45-222-W-04 revH: 45-284-026: OM1100549