FlexPoint™ Wall-Mounting Kit
User Instructions
Description
The 4380 FlexPoint
(2)“L” shaped brackets.
(4)Flat head screws,
(4)Wall mounting screws
Warning:
Before installing a FlexPoint unit, make sure to disconnect it from its power adapter and to disconnect the power adapter from the AC power outlet.
Mounting
1.Align the screw threads of the FlexPoint unit with the holes in the bracket.
2.Attach one “L” bracket on each side of the unit using two
3.The FlexPoint with the tab bracket should look as in the picture below.
4.Attach unit to the desired surface using appropriate screws (not provided).
5.Follow any installation instructions in the FlexPoint User Installation guide.
Technical Support:
If you encounter problems in installing or maintaining this product, contact Omnitron Technical Support:
Phone: | (949) |
Fax: | (949) |
Address: Omnitron Systems Technology, Inc. | |
| 140 Technology Drive, #500 |
| Irvine, CA 92618 USA |
Email: | |
URL: | |
